Electrical Connection; Aligning The Appliance - Siemens KA N Serie Instrucciones De Uso

S
S
S
Installing the filter in the water
supply line
S
S

Electrical connection

Do not use an extension lead or
a multi plug socket. This appliance
must be connected to a perma
nently installed socket.
If the appliance is to be operated
in a non European country, check
on the rating plate whether the indi
cated voltage and current type
correspond to the values of your
mains supply. The rating plate is
situated in the bottom left hand side
of the appliance. Any necessary
exchanging of the mains lead
should carried out by a specialist
electrician.
Warning!
!
Never connect the appliance
to electronic energy saver plugs
(e.g. Ecoboy: Sava Plug) or to
power inverters which convert the
direct current to 230 V alternating
current (e.g. solar equipment, power
supplies on ships).
Important!
Checking the water
connection for leaks
S
S
S
S

Aligning the appliance

S
S
S
en
37