SICK FGS 300 Instrucciones De Operación página 129

Operating Instructions
FGS
8 007 716/KA 06/31-03-00
Safety
The tests must be performed by qualified experts or by
specially authorised and instructed personnel and must
be documented in such a way as to be able to be viewed
and understood at any time.
Our Operating Instructions shall be given to the employee
(operator) working at the machine on which our protection
equipment is used. The employee shall be introduced to
his job and the equipment by an expert.
The test protocol according to the use of the non-contact
safety device is printed at the end of the English section of
these Operating Instructions. Acceptance testing is
performed on the basis of that protocol.
© SICK AG • Safety Systems • Germany • All rights reserved
GB
Chapter 2
129