General Safety Instructions And Safety Measures - SICK MSM Instrucciones De Operación

Operating
Instructions
MSM
WARNING
8 008 329/O371/05-04-04 © SICK AG • Industrial Safety Systems • Germany • All rights reserved
Safety
2.3 General safety instructions and
safety measures
Safety instructions
The following points must be observed in order to guarantee
correct use of the muting module:
Ø Installation and electrical connection is to be performed
only by specialist personnel with practical technical training
and knowledge of the applicable safety regulations.
Ø The instructions on electrical connection and commissioning
must be followed.
Ø The device must be tested and commissioned into
operation by qualified personnel, where stipulated by the
applicable rules and regulations.
Ø The personnel operating the machine fitted with the
photoelectric safety switch must be instructed as to its use
by specialist personnel prior to beginning work. The
instruction is the responsibility of the machine owners.
Ø Prior to initial commissioning the following points must be
observed:
1. The hazardous area must be in full view of any person
activating the reset or override commands.
An adhesive safety label is supplied with the device.
The label in the relevant language must be affixed,
during commissioning, at a position where it is readable
from the command unit .
GB
Section 2
179