Safety Information For Circular Saw Blades; Original Accessories/Auxiliary Equipment; Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PHKSA 12 A1 Traducción Del Manual De Instrucciones Original

Ocultar thumbs Ver también para PHKSA 12 A1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
The charger is suitable for indoor use only.
WARNING!
Do not operate the appliance with a dam-
aged cable, power cord or mains plug. A
damaged power cable poses a threat of a
fatal electric shock.
Supplementary notes:
Do not use any grinding discs.
Use only saw blades with diameters corre-
sponding to the label on the saw.
Always use the right saw blade for the material
being worked.
Use only saw blades with a speed marking
that corresponds to or is higher than the speed
specified for the power tool.
Saw blades that are intended for use on wood
or similar materials must comply with EN 847-1.
Do not allow the teeth of the saw blade to
overheat.
When sawing plastic, avoid melting the plastic.
Wear a dust mask when sawing.
Only use recommended saw blades.
Always wear hearing protection!
GB │ IE
24 
Safety information for circular saw
blades
Wear protective gloves!
Wear a dust mask!
Wear protective goggles!
Wear hearing protection!
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Original accessories/auxiliary
equipment
Only use the accessories and additional
equipment that are specified in the oper-
ating instructions and compatible with the
appliance.

Before use

Removing/charging/inserting the
battery pack
CAUTION!
Always unplug the appliance before you
remove the battery pack
the battery pack to the charger.
NOTE
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. This guarantees
full battery performance. You can charge the
lithium-ion battery at any time without short-
ening its service life. Interrupting the charging
process does not damage the battery.
If the battery overheats during operation, it
cannot be charged immediately. Allow it to
cool down first.
Never charge the battery pack
ambient temperature is below 10°C or above
40°C.
from or connect
if the
PHKSA 12 A1

Publicidad

Tabla de contenido
loading

Tabla de contenido