Safety Notes; Intended Use; Operating And Status Indicators - SICK GRL18V Instrucciones De Operación

1

Safety notes

2

Intended use

3

Operating and status indicators

Table 1: Dimensional drawings
M18x1
2
3
5
1
67
M18x1
2.2
(0.09)
2.8
(0.11)
Figure 1: Short variant, con‐
necting cable
8021183.16B5 | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and setting may only be performed by skilled per‐
son.
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
When commissioning, protect the device from moisture and contamination.
These operating instructions contain information required during the life cycle of
■
the sensor.
The GRL18(S)V is an opto-electronic photoelectric retro-reflective sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A reflector is required for this product to function. If the product is used for any
other purpose or modified in any way, any warranty claim against SICK AG shall become
void.
M18x1
2
3
5
1
M12x1
67
M18x1
2.2
(0.09)
2.8
(0.11)
Figure 2: Short variant, M12
male connector
M18x1
2
3
4
5
1
67
M18x1
2.2
(0.09)
2.8
(0.11)
Figure 3: Short variant, poten‐
tiometer, connecting cable
SAFETY NOTES
M18x1
2
3
4
5
1
M12x1
67
M18x1
2.2
(0.09)
2.8
(0.11)
Figure 4: Short variant, poten‐
tiometer, M12 male connector
1
5