Dividing A Recorded Track Into Two Tracks (Divide Function) - Sony ZS-M30 Manual De Instrucciones

Erasing a portion of a track
By using the Divide, Erase (page 25) and
Combine (page 28) functions, you can erase
specific portions of a track.
Example: Erasing a portion of track A
Track
number
Portion to
be erased
1
Divide the track A into three portions.
Add the track marks 2 and 3 to the
beginning and the end of the portion
you want to erase using the Divide
function.
2
Erase the track A-2.
Erase the track A-2 using the function
to erase a single track (page 25).
3
Combine the tracks A-1 and A-3.
Erase the track marks 2 using the
Combine function (page 28).
Note
After you stop editing, do
not disconnect the mains
lead or move the player while "TOC EDIT"
is flashing in the display. If you do so, editing
may not be done properly.
Dividing a recorded
track into two tracks
(Divide Function)
When recording from the radio, etc., track
marks may not be added correctly. A
number of tracks may be included in a single
track. You can divide these tracks into
separate tracks, and add a new track mark to
each track. All tracks following the divided
tracks are renumbered.
MD u
Example: Dividing track 1 into two tracks
Track
number
Dividing
Track 1 is divided, and the track
mark 2 is added.
1
While playing the MD, press MD u
at the point where you want to create a
new track.
The player pauses.
NO
CANCEL
YES
ENTER
EDIT
continued
GB
27