Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Waking up to music

You can wake up to music or a radio
programme at a preset time.
Make sure you have set the clock (see
"Setting the clock" on page 35).
NO
CANCEL
Before you begin, make sure "TIMER" is
not displayed. If displayed, press
STANDBY.
1
Prepare the music source you want to
play.
Source
MD
CD
RADIO
GAME (LINE)
2
Press CLOCK/SLEEP/TIMER until
"Timer Set" appears in the display, and
press YES•ENTER.
"TIMER" flashes in the display.
Make the following settings by
checking the indications in the display.
GB
36
CLOCK/SLEEP/TIMER
STANDBY
Do this
Insert an MD.
Insert a CD.
Tune in the station.
Turn on the component
connected to LINE IN.
3
Turn the jog dial until "PLAY" flashes
in the display, and press YES•ENTER.
"MD", "CD", "RADIO" or "LINE"
flashes in the display.
4
Turn the jog until the music source you
want to play ("MD", "CD", "RADIO"
or "LINE") appears in the display, and
press YES•ENTER.
5
Set the timer to the hour and the
minutes you want the music to go on.
1 Turn the jog dial to set the hour and
YES
ENTER
2 Turn the jog dial to set the minutes
Jog dial
6
Set the timer to the hour and the
minutes you want the music to go off
(Do as step 5.).
7
Turn the jog dial to set the volume you
want, and press YES•ENTER.
8
Press STANDBY.
"TIMER" lights up; the player enters
the standby mode.
At the preset time, the power will go on
and music will play. Then the power
will go off at the preset time, and the
player will enter the standby mode
again.
press YES•ENTER.
and press YES•ENTER.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido