Festool PLANEX LHS 225 EQ Manual De Instrucciones Original/Lista De Piezas De Repuesto página 15

Long reach sander PLANEX LHS 225
Table of contents
1 Symbols
2 Technical data
3 Machine features
4 Intended use
5 Safety instructions
6 Commissioning
7 Machine settings
8 Operation
9 Service and maintenance
10 Accessories
11 Disposal
12 Warranty
13 EU Declaration of Conformity
14 Troubleshooting
The specifi ed illustrations are at the beginning of
the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Wear a dust mask!
Wear ear protection.
Clean the air vent slits and dust fi lter
Read the Operating Instructions/Notes!
2 Technical data
Power
Rotational speed
Sanding pad dia.
Abrasive dia.
Tool holder
Dust extractor connection dia.
Length of short version (without extension pipe)
Length of long version (with extension pipe)
Weight without cable
Short version
Long version
Protection class
3
[1-1]
[1-2]
[1-3]
[1-4]
[1-5]
4
The PLANEX is designed for sanding primed dry-
wall constructions, ceilings and walls in internal
and external applications as well as removing
carpet residue, coats of paint, coverings, adhesives
and loose plaster.
When sanding large fi lled surfaces with high dust
development, we recommend the Festool mobile
dust extractor CTL/M 36 E AC PLANEX.
The user bears the responsibility for damage and
accidents caused by improper use.
5
5.1
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2
- This machine is designed for sanding. Please
read all of the safety information, instructions,
illustrations and descriptions delivered with the
machine. If the following instructions are not
observed, this can result in an electric shock,
fi re and/or serious injury.
- Do not use this machine to perform work such
as roughing, brushing, polishing or disc sand-
550 W
ing. Performing tasks for which the machine
340 – 910 rpm
is not designed can create hazards and lead to
215 mm
225 mm injury.
- Never use accessories that were not specially
D 13/10
36 mm developed and intended for this machine. Just
because an accessory part can be fi tted on your
(27 mm)
machine does not guarantee danger-free opera-
tion.
1.10 m
- The permissible rotational speed of the acces-
sory must be at least as high as the maximum
1.60 m
speed specifi ed on the machine. Accessories
that rotate faster than the permissible level can
3.80 kg
4.60 kg rupture.
II/
Machine features
Sanding head
Extension pipe
Handle section
Abrasive
Mains power cable
Intended use
Safety instructions
General safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
Machine-related safety instructions
15