Hot Surfaces - Siemens SIMOTICS GP Manual De Instrucciones

● Only remove the covers using the methods described by these
operating instructions.
● Operate the motor properly.
● Perform regular maintenance on the motor.
● Secure free-standing shaft ends.

HOT SURFACES

WARNING
Hot surfaces
Electric motors have hot surfaces. Do not touch these surfaces. They could
cause burns.
● Allow the motor to cool before starting work on the motor.
● Only remove the covers using the methods described by these
operating instructions.
● Operate the motor properly.
UNHEALTHY SUBSTANCES
CAUTION
Hazardous substances
Chemical substances required for the setup, operation and maintenance
of motors can present a health risk.
Poisoning, skin damage, cauterization of the respiratory tract, and other
health damage may result.
● Read the information in these operating instructions and the product
information supplied by the manufacturer.
● Observe the relevant safety regulations and wear the personal
protective equipment specified.
Unrestricted 58 A5E43486667A_AB