Siemens SIMOTICS GP Manual De Instrucciones página 96

Preparing for disassembly:
Disassembly of the machine must be carried out and/or supervised
by qualified personnel with appropriate expert knowledge.
1. Contact a certified waste disposal organization in your vicinity. Clarify
what is expected in terms of the quality of dismantling the machine and
provision of the components.
2. Follow the five safety rules.
2.1.- Disconnect the system. Also disconnect the auxiliary circuits,
for example, anti-condensation heating.
2.2.- Secure against reconnection.
2.3.- Verify absence of operating voltage.
2.4.- Ground and short-circuit.
2.5.- Provide protection against adjacent live parts.
To energize the system, apply the measures in reverse order.
3. Disconnect all electrical connections and remove all cables.
4. Remove all liquids such as oil and cooling liquids. Collect the liquids
separately and dispose of them in a professional manner.
5. Detach the machine fixings.
6. Transport the machine to a suitable location for disassembly.
Dismantling the Motor
Dismantle the motor using the general procedures commonly used in
mechanical engineering.
WARNING
Machine parts can fall
1.-
The machine is made up of heavy parts. These parts are liable to fall
during dismantling. This can result in death, serious injury or material
damage.
2.- Before you release any machine parts, secure them so that they cannot
fall.
3.- Take care when disassembling the motor since there are sharp parts that
can cause bodily injury.
Unrestricted 96 A5E43486667A_AB