Specifications E - Olympus PFL-E01 Manual De Instrucciones

・Do not use commercial defogging agents. Always use the original Olympus defogging
silica gel.
・Do not use adhesive for repairs or other purposes. When repair is required, please
contact a service station of our company or your dealer.
Ｑ １ １ ： Please tell me about repairs.
Ａ １ １ ： Please contact a service station of our company or your dealer, if repair should be
necessary. Do not try to repair, disassemble or modify the Case yourself. Repair,
disassembly or modification by you or third parties not authorized by Olympus
invalidates the guarantee.
Ｑ １ ２ ：What are the model numbers of the PFL-E01 accessories?
Ａ １ ２ ：The following accessories are being sold.
(1) O-ring for the PFL-E01 body (POL-E201): This is a silicone rubber O-ring packing to
be installed in the PFL-E01 body to make it waterproof. O-rings for other Case
models cannot be used.
(2) Silicone O-ring grease (PSOLG-1): This is a special grease for silicone O-ring
maintenance.
(3) Silica gel (SILCA-5): This is a desiccant used to prevent fogging of the glass parts of
the Case. The quantity is five bags.
※You can order in large computer shops and camera mass sale stores.
※Please contact your dealer or a service station of our company when replacement is
required. Replacement will be made against payment.
Specifications
Available models
Pressure resistance Depth of up to 60 m
Main materials
Dimensions
Weight
※We reserve the right to change the external appearance and the specifications without
notice.
Olympus digital camera and
Electronic Flash (FL-36)
Main body
Mode dial
Operation buttons/buckles/arm mount screw shafts: Nickel-plated brass.
Arm screw mount
Underwater TTL cable/hot shoe cable : PVC.
O-rings
Diffuser
Width 132 mm x height 205 mm x thickness 145 mm
1,380 g (without flash and accessories)
E-26
: Polycarbonate resin.
: Polycarbonate resin.
: BERIC alloy
: Silicone rubber.
: Milk-white acrylic resin.ゴム
En