Hach HQ1110 Manual Básico Del Usuario página 19

Section 10 Probe settings
When a probe is connected to the meter, the user can change the probe settings for measurements,
calibrations and verifications. Refer to the steps that follow to access the settings for the connected
probe. For a complete description of the settings, refer to the online user manual for the meter.
Note: Password protection may prevent access to some menus. Refer to the online user manual for information on
security settings.
1. Push and select Settings. The list of settings shows.
2. Select the probe name.
3. Select the applicable option: Measurement, Calibration or Verification.
Section 11 Data management
The meter saves the data from sample measurements, calibrations and verifications as follows:
• Sample measurements—The meter automatically saves the measured sample data when the
measurement mode is Push to read or Interval. When the measurement mode is Continuous, the
user must select Save to save the measured sample data. The save icon shows on the Home
screen when the measured sample data is in the data log.
• Calibration data—The user must select Save to save the calibration data. The calibration data is
saved in the meter and in the Intellical probe.
• Verification data—The user must select Save to save the verification data.
Complete the steps that follow to view, export or delete data.
1. Push and select Data, or select Data from the Home screen.
2. Select an option.
Option Description
View data Shows the data in the data log. The most recent data shows first. Push the down arrow to
see more data. The calibration icon shows when the data type is calibration data. The
verification icon shows when the data type is verification data.
To see more details for a data point, select a data row and push the right arrow. To apply a
filter and show only the filtered data, push the left arrow and select a parameter, data type
or date range.
Export data Sends a copy of all of the data in the data log to a connected PC or a USB storage device.
To connect the instrument to a PC, refer to
to a standard USB storage device, use a micro USB to USB Type A adapter. Alternatively,
use a USB storage device that has a micro USB connector.
When the instrument connects to a PC, a File Explorer window opens to the connected
instrument drive. Expand the drive and look for a subfolder with the meter name and serial
number. The data file shows as a .csv file with the date and time as the file name. Save
the .csv file to a location on the PC.
Note: If the File Explorer window does not open automatically, open a File Explorer window
and look for a drive with the meter name.
Calibration Shows the current and previous calibration data for a connected probe.
history
Delete data Erases all of the data in the data log. Password protection may prevent access to the delete
data option.
Figure 4 on page 10. To connect the instrument
English 19