Dash Disassembly; Kit Preparation - Metra 99-3016G Instrucciones De Instalación

Dash Disassembly

1. Unclip and remove the trim panel
surrounding the radio/climate
control panel. (Figure A)
2. Remove (4) 9/32" screws securing
the radio/climate control panel.
(Figure B)
3. Remove (2) 9/32" screws securing
the CD player then unplug and
remove the player.
4. Unclip and slide out the factory
tuner module then unplug and
remove it.
5. Unclip and remove the climate
controls from the factory
trim panel.
6. Unclip and remove the climate
control vents from the factory
trim panel.
Continue to kit preparation
(Figure A)
(Figure B)
99-3016G
1. Cut and remove the specified
areas in the sub dash. (Figure A)
Continue to kit assembly
Remove shaded area
(Figure A)
2

Kit Preparation