Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
SCaN
•
Function
The Scan function allows running sequence of
Presets, Pattern and/or Auto Pans. Max 8 Scan
can be stored. Each Scan can have max 20 action
entities which can be preset, pattern or Auto Pan.
Preset speed can be set up and the repeat number
of Pattern & Auto Pan can be set up in Scan setup.
Dwell time between actions can be set up also.
Dwell Time
Preset 1
Pattern 1
Max 20 Entities
•
Set Scan
Use OSD Menu to create a Scan.
•
Run Scan
Method1) <Run Scan> [Scan NO] [Enter]
Method2) <Go Preset> [Scan NO.+150]
ex) Run Scan 7 : <Go Preset> [157]
•
Delete Scan
Use OSD Menu to delete.
SCHeDule
•
Function
The Schedule function allows running an appropriate
function like Preset, Auto Pan, Scan, Pattern, Home
move at designated day and time. For example, if you
setup a rule Tuesday at 9:00AM and Preset 1 (say
Main Gate), the camera will move to main gate every
Tuesday at 9:00AM. If you choose Weekday, camera
will move to Main gate everyday except weekend.
It is noted that due to the real time clock, the time
data will be kept regardless of blackout. The initial
time and day setup is essential to proper Schedule
function.
•
Set Schedule
Use OSD Menu to create a Schedule
•
Run Schedule
Use OSD Menu of Schedule Master Enable
•
Delete Schedule
Use OSD Menu to delete.
18 – 36x IP Smart Dome Camera
OTHer FuNCTIONS
•
Preset Lock
This function is made to protect preset data from
unauthorized overwriting. If Preset Lock is ON, Preset
save command using Hot Key is disabled while Preset
save using OSD Menu is acceptable.
•
Power Up Action
This function enables to resume the last action executed
before power down. Most of actions such as Preset,
Pattern, Auto Pan and Scan are available for this function
but Jog actions are not available to resume.
if there are no setup for those functions like
Scan 1
Preset, Pattern, Auto Pan and Scan, Camera will
automatically move to Home position after rebooting.If
Power Up Action is set to be ON, camera will continue
the function which is executed lastly after rebooting.
•
Auto Flip
In case that tilt angle arrives at the top of tilt orbit
(90°), zoom module camera keep moving to opposite
tilt direction (180°) to keep tracing targets. As soon
as zoom module camera passes through the top
of tilt direction(90°), images should be reversed
automatically and F appears in screen. If this function
is set to OFF, tilt movement range is 0 ~ 90°.
•
Parking Action
This function enables to locate the camera to specific
position automatically if operator doesn't operate the
controller for a while. The Park Time can be defined as
an interval from 5 seconds to 4 hours.
•
Alarm Input
8 Alarm Inputs are used. If an external sensor
is activated, camera can be set to move to
corresponding preset position. It is noted that the
latest alarm input is effective if multiple sensors are
activated.
•
Alarm Output
There are 4 Ch. of Alarm Outputs and all of them can
be assigned to a certain Preset number. For example,
if you assign Preset 5 to AO2, calling Preset 5 result in
turning On of AO2.
•
Privacy Zone Mask
To protect privacy, MAX. 8 Privacy Masks can be
created on the arbitrary position to hide objects such
as windows, shops or private house. With Spherical
Coordinates system, powerful Privacy Zone Mask
function is possible.
•
GENERAL/SPECIAL Image Setup
WB (White Balance) and AE (Auto Exposure) can
be set up independently for each preset. There
are 2 modes, "General" mode & "Special" mode.
The General mode means that WB or AE can be
Publicidad
Capítulos
Tabla de contenido
