Descargar Imprimir esta página

Auskoppelwege Konfigurieren Und Stage-Modus Aktivieren; Configuring The Aux Send Ways And Activating The Stage Mode - IMG STAGELINE MMX-206 Manual De Instrucciones

Publicidad

muss der Pegel der Ausgangssumme entspre-
chend niedriger oder höher eingestellt werden.
5) Für die Zusatzeingänge AUX INPUT 1 und 2 mit
den Routing-Tasten (67) die Ausgangssumme
oder das Subgruppenpaar anwählen, auf wel-
ches das jeweilige Signal geschaltet werden soll:
Taste nicht gedrückt – Ausgangssumme L-R
Taste gedrückt – AUX 1 auf Gruppe G1 und G2
AUX 2 auf Gruppe G3 und G4
Mit den Reglern LEVEL (66) die Signale auf den
angewählten Weg mischen und mit den Reglern
HI und LO (64) den Klang einstellen.
6) Die Signale der Zusatzeingänge AUX INPUT 3
und 4 mit den Reglern (69) auf die Ausgangs-
summe L-R mischen.
7) Die Regler der nicht benutzten Zusatzeingänge
auf Null drehen.
8) Werden Kanäle auf eine der Subgruppen ge-
mischt (z. B. alle Mikrofone eines Schlagzeuges),
zuerst die Pegel dieser Kanäle untereinander mit
den Kanalfadern optimal abstimmen und dann die
Lautstärke der Subgruppe mit dem entsprechen-
den Fader G1 bis G4 (74). Werden die Subgrup-
pen auf die Ausgangssumme geschaltet, liegen
die Gruppen G1 und G3 auf dem linken Kanal und
die Gruppen G2 und G4 auf dem rechten Kanal.
6.3 Auskoppelwege konfigurieren und
Stage-Modus aktivieren
1) Zuerst überlegen, ob es günstiger ist, im Normal-
Modus die Summensignale der Auskoppelwege
A1 bis A4 über die Regler A1 bis A4 (82) zu regeln
oder diese Summensignale im Stage-Modus über
die Fader G1 bis G4 (74).
Soll der Stage-Modus aktiviert werden, kann
das getrennt für die Auskoppelwege A1, A2 und
die Wege A3, A4 erfolgen. Dazu mit einem dünnen
Gegenstand (z. B. kleiner Schraubendreher oder
Kugelschreiber) die versenkte Taste 1-2 und / oder
3-4 (73) drücken. Bei gedrückter Taste leuchtet
die darüber liegende grüne Kontroll-LED und:
tive signal is to be switched:
button not pressed – master output L-R
button pressed – AUX 1 to group G1 and G2
AUX 2 to group G3 and G4
Add the signals to the selected way with the con-
trols LEVEL (66) and adjust the sound with the
controls HI and LO (64).
6) Add the signals of the additional inputs AUX
INPUT 3 and 4 with the controls (69) to the
master output L-R.
7) Turn the controls of the additional inputs not used
to zero.
8) If channels are added to one of the subgroups
(e. g. all microphones of the drums), first tune the
levels of these channels with each other in an
optimum way by means of the channel faders
and then tune the volume of the subgroup with
the corresponding fader G1 to G4 (74). If the sub-
groups are switched to the master output, the
groups G1 and G3 are on the left channel, and
the groups G2 and G4 are on the right channel.
6.3 Configuring the AUX send ways and
activating the stage mode
1) First consider which way is more advantageous:
in the normal mode to adjust the master signals
of the AUX send ways A1 to A4 via the controls
A1 to A4 (82) or in the stage mode to adjust these
master signals via the faders G1 to G4 (74).
Activating the stage mode can separately be
made for the AUX send ways A1, A2 and the
ways A3, A4. Press the recessed button 1-2 and/
or 3-4 (73) with a thin object (e. g. small screw-
driver or ball point pen). With the button pressed,
the green indicating LED above it lights up and:
1. The faders for the subgroups G1 and G2 (74)
are exchanged with the level controls (82) for
the AUX send ways A1 and A2.
2. The corresponding output jacks G1 and G2
(60) are exchanged with the output jacks A1
and A2 (77).
G1
A1
G3
A3
60
GROUP / AUX OUTPUT
G2
A2
G4
A4
AUX INPUT 1
AUX INPUT 2
LEFT (MONO)
LEFT (MONO)
RIGHT
RIGHT
61
AUX INPUT 3
AUX INPUT 4
LEFT (MONO)
L
RIGHT
R
62
+15
12
9
6
POWER +48V
3
0dB
3
6
9
12
15
-20
LEFT
RIGHT
63
AUX INPUT 1
AUX INPUT 2
HI
HI
64
+
+
LO
LO
+
+
A5
A5
65
0
10
0
10
A6
A6
0
10
0
10
LEVEL
LEVEL
66
0
10
0
10
L–R
L–R
1–2
3–4
67
PFL/SOLO
PFL/SOLO
68
AUX INPUT 3
AUX INPUT 4
69
0
10
0
10
70
PFL/SOLO
PFL/SOLO
1 – 2
3 – 4
TO L – R
TO L – R
71
PFL/SOLO
PFL/SOLO
G 1
G 3
72
PFL/SOLO
PFL/SOLO
G 2
G 4
STAGE
MODE
1 – 2
3– 4
73
G1
G2
G3
A1
A2
A3
74
Ausgangsfeld
Output section
LEFT
RIGHT
75
MASTER OUTPUT
A1
G1
LEFT
MASTER
76
INSERT
A2
G2
RIGHT
A3
G3
G1
77
GROUP
78
A4
G4
INSERT
G2
CONTROL
A5
ROOM
79
A6
L
PHANTOM
80
R
TAPE REC
81
A1
POWER
G1
0
10
PFL/SOLO
A2
G2
0
10
PFL/SOLO
A3
G3
0
10
PFL/SOLO
A4
G4
0
10
PFL/SOLO
A5
0
10
82
PFL/SOLO
A6
0
10
83
PFL/SOLO
CR/ PHONES
LISTEN
MODE
84
PFL SOLO
85
0
10
LEVEL
PHONES
86
+10
+10
87
+5
+5
0 dB
0 dB
–5
–5
–10
–10
G4
L – R
A4
Fig. 14
15

Publicidad

loading

Este manual también es adecuado para:

20.1820