Working Advice; Maintenance And Cleaning - Würth BMH 32-XE Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-820-004.book Page 20 Tuesday, August 4, 2015 3:37 PM
Overload Clutch
 If the tool insert becomes caught or jammed,
the drive to the drill spindle is interrupted.
Because of the forces that occur, always hold
the power tool firmly with both hands and pro-
vide for a secure stance.
 If the power tool jams, switch the machine off
and loosen the tool insert. When switching the
machine on with the drilling tool jammed, high
reaction torques can occur.
Changing the position of the chisel
The chisel can be locked in 12 positions. In this manner, the
optimum working position can be set for each application.
• Insert the chisel into the tool holder.
• Turn the mode selector switch 5 into the position "chang-
ing the position of the chisel" (see "Setting the operating
mode", page 19).
• Turn the tool holder to the desired chiselling position.
• Turn the mode selector switch 5 to the "chiselling" posi-
tion. The tool holder is now locked.
• For chiselling, set the rotation direction to right rotation.

Working Advice

 Before any work on the machine itself, pull the
mains plug.
 Apply the power tool to the screw/nut only
when it is switched off. Rotating tool inserts can slip
off.
Vibration Damper
The integrated vibration damper reduces occurring vibrations.

Maintenance and Cleaning

 Before any work on the machine itself, pull the
mains plug.
 For safe and proper working, always keep the
machine and ventilation slots clean.
 A damaged dust protection cap should be
changed immediately. We recommend having
this carried out by an after-sales service.
When replacing the power tool's cable is required, have this
carried out by a Würth master-Service or by an authorised
customer services agent for Würth power tools, in order to
avoid hazardous situations.
If the machine should fail despite the care taken in manufac-
turing and testing procedures, repair should be carried out by
a Würth master-Service.
In all correspondence and spare parts orders, please always
include the article number given on the type plate of the
machine.
The current spare parts list for this power tool can be viewed
on the internet at http://www.wuerth.com/partsmanager or
be requested from your next Würth branch office.
Guarantee
For this Würth power tool, we provide a guarantee in accord-
ance with the legal/country-specific regulations from the date
of purchase (verified by invoice or delivery document). Dam-
age that has occurred will be corrected by replacement or
repair.
Damage caused by normal wear, overloading or improper
handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent undisas-
sembled to a Würth branch office, your Würth sales repre-
sentative or a customer service agent for Würth power tools.
Disposal
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Directive
2012/19/EU for Waste Electrical and Elec-
tronic Equipment and its implementation into
national right, power tools that are no longer
usable must be collected separately and dis-
posed of in an environmentally correct man-
ner.
Subject to change without notice.
20