3.11. Removing The Compressed Air Cylinders - MSA AirMaXX alpha Serie Manual Del Usuario

MSA

3.11. Removing the Compressed Air Cylinders

Fig. 8 Removing the compressed air cylinders
(1) Place the compressed air breathing apparatus in a horizontal position with
the cylinder facing up.
(2) Hinge up tension clamp at cylinder strap and, if necessary, loosen the
Velcro connection and by pulling the bracket, the tension and loosen the
strap.
When exchanging compressed air cylinders of the same diameter, only
the tension clamp need be opened.
(3) Unscrew cylinder valve(s) from pressure reducer and/or T-piece.
Warning!
Do not remove or transport the compressed air cylinder(s) from the
cylinder strap by the handwheel.
This could accidentally open the cylinder valve.
(4) Lift compressed air cylinder(s) at valve and pull out of cylinder strap.
(5) Cover high pressure connection and cylinder valve(s) with protective cap(s).
GB
USING THE COMPRESSED AIR BREATHING APPARATUS
AirMaXX SL
13