Deactivating The Preset Time; Cleaning And Care - Beem FRESH-AROMA-PURE 05633 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
3. Press the PROG (programme) button (21) and hold it down. The PROG (programme)
control lamp fl ashes.
The time 0:00 and the STARTZEIT (starting time) symbol appear in the display.
The hour indicator starts to fl ash.
4. Set the hours by repeatedly pressing the ZEIT (time) button.
5. Wait for approx. 3 seconds until the minutes fl ash.
6. Set the minutes by repeatedly pressing the ZEIT (time) button.
7. Release the PROG (programme) button. The display shows the current time. The starting
time for the preselected time is saved.
For preparation with coffee powder the function for coffee beans has to be deactivated
and the MAHLEN & BRÜHEN (grinding & brewing) (19) control light must be off. If
this is not the case, press the MAHLEN & BRÜHEN (grinding & brewing) button to
deactivate the function.
8. Press the PROG (programme) button again to activate the preset time. The PROG (pro-
gramme) control lamp lights up. The preset time is activated.
Once the set time has been reached the brewing process starts automatically. The time 0:00
and the BRÜHZEIT (brewing time) symbol appear in the display.
many minutes ago the brewing process started.
9. Press the I / O (7) button to switch the device to the stand-by mode. The operating lamp
goes out. In the display, the BRÜHZEIT (brewing time) symbol goes out and the display
switches to the current time.

Deactivating the Preset Time

To deactivate the preset time setting, press the PROG (programme) button (21). The PROG
(programme) control lamp goes out and the programming is deactivated. However, the preset
time is retained and can be reactivated at any time until a new preset time is programmed in or
the device has been disconnected from the power supply.

Cleaning and Care

PLEASE NOTE!
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to clean
the device. These may damage the surface.
1. Empty the permanent fi lter (16) or dispose of the basket fi lter bag and empty the vacuum
jug if necessary (10).
2. Clean the permanent fi lter, the fi lter holder (17), its lid (15) and the thermal jug after every
use with a mild detergent and warm water, or in the washing machine.
05633_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 30
05633_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 30
The time display shows how
08.04.2019 15:47:35
08.04.2019 15:47:35
30

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido