Handling And Operation; Setting The Time; Filling The Water Tank - Beem FRESH-AROMA-PURE 05633 Instrucciones De Uso

EN
• Do not place the device below kitchen wall units or similar cupboards. The rising steam
could cause damage to them!
• The surfaces of furniture may possibly contain elements which can attack and soften the
feet of the device. If necessary, place a suitable pad below the feet.
1. Place the device in a suitable location, following the safety notices and the notices provided
at the beginning of this chapter.
2. Insert the mains plug into a properly installed socket that is easily accessible.

Handling and Operation

PLEASE NOTE!
• Do not pour milk or other liquids into the water tank. Only ever use water to make
coffee!
• Do not overfi ll the permanent fi lter and / or the coffee bean compartment.

Setting the Time

As soon as the mains plug is plugged into a plug socket, the display lighting turns on and the
time display 0:00 fl ashes. The clock has a 12-hour time format (AM / PM). The symbols AM and
PM indicate whether it is morning or afternoon.
1. Press the ZEIT (time) button (18). The hour indicator starts to fl ash.
2. Set the hours by repeatedly pressing the ZEIT (time) button.
3. Wait for approx. 3 seconds until the minutes fl ash.
4. Set the minutes by repeatedly pressing the ZEIT (time) button. The time display stops
fl ashing after around 3 seconds and remains lit.
The time has now been set.
The time is saved until a new time is set or the device has been disconnected from the
power supply.

Filling the Water Tank

1. Open the water tank lid (2).
2. Pour the quantity of water required for the number of cups you want (maximum 10 cups)
into the water tank (3).
3. Close the water tank lid. You must hear and feel it engage.
All the water in the water tank is always used.
05633_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 26 05633_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 26
26
08.04.2019 15:47:35 08.04.2019 15:47:35