Specifications - D Devices D_SMALL CAL23 Manual De Instrucciones

3. Especificaciones
Chamber inner dimensions (Diameter X Depth)
Power supply
Sterilizing temperature/pressure
Caution: Temperature/Pressure here means the chamber temperature and pressure during the phase
of sterilization. The value varies under different atmospheric pressure.
Power fuse
Water tank capacity
Environment temperature
Relative humidity range
Figures
Package Key
Start/Stop key
Select Key
Dry Key
Tip: Standard atmospheric pressure: It the atmospheric pressure at sea level. It refers to 1 Standard
atmospheric pressure. The value is 0.1Mpa=1000Hpa=1.0 Bar. Atmospheric pressure decreases by higher
altitude. An increase of altitude of 1000 meters will result in a decrease of ATM PR of approximately BAF
decreases by about
54750_AUTOCLAVE_IFU-OK.indd 5
22 L: 249 mm x 450 mm
17 L: 249 mm x 355 mm
According to the nameplate
121°C/1,0~1,3 bar (under standard atmospheric
pressure)
134°C/2,0~2,4 bar (under standard atmospheric
pressure)
F20AL 250 V/F12AL 250 V
3.5 L
+5°C ~ +40°C
30% - 75%
Test Cycle Key
Used Water Outlet
Cycle Step Key
Caution & Warning
Type B Device
Grounding
5
21/2/20 13:16