Kohler K-T16236 Guia De Instalacion página 4

Ocultar thumbs Ver también para K-T16236:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Plug Button
Setscrew
Lift Rod
Diverter Body
2. Install the Spout
NOTICE: To avoid damage to the O-ring on the diverter body, keep
the diverter tube clean.
TIP: To easily install the lift rod, lift up and hold the stem with a
pair of pliers.
Fully insert the lift rod into the stem of the diverter body.
Install the diverter tube over the lift rod and into the diverter
body.
Loosen the setscrew on the spout assembly until it is clear of the
inside wall of the spout.
Apply a ring of plumbers putty or other sealant around the
underside of the spout base according to the sealant
manufacturer's instructions.
Position the spout over the diverter tube, then carefully press
down until the spout contacts the finished deck.
Rotate the spout until it is aligned to face straight forward.
Retighten the setscrew.
Push the plug button into place over the setscrew.
Install the lift knob onto the lift rod.
Remove any excess plumbers putty or sealant.
1054811-2-B
Lift Knob
Spout Assembly
Diverter Tube
Finished Deck
4
Kohler Co.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

T16236-4-bnK-t16236-3-cpT16236-4-snK-t16236-4-bnT16236-3-bn

Tabla de contenido