Complete The Installation - Kohler K-T16236 Guia De Instalacion

Spout
Aerator

4. Complete the Installation

Ensure that both handles are turned off (hot = clockwise, cold =
counterclockwise).
Make sure that all connections are tight.
Remove the aerator.
Turn on the main water supply and check for leaks.
Turn on the hot and cold valves and run water through the spout
to remove debris. Check for leaks.
Confirm proper diverter operation.
Turn the handles to the off position and then back to the on
position. Verify that the water flow is diverted back to the spout.
Turn the handles to the off position.
Remove any debris from the aerator.
Reinstall the aerator.
1054811-2-B 6 Kohler Co.