Troubleshooting - Parkside PDAP 75 A1 Traducción Del Manual De Instrucciones Origina

■ Check the polishing disc
■ Clean the appliance with a soft, dry cloth only.
■ Never use sharp or abrasive cleaning agents under any
circumstances.

Troubleshooting

Fault
Speed too slow, air
escapes from the outlet.
Appliance does not
move; compressed air
escapes completely
through the outlet.
PDAP 75 A1
regularly for damage.
Possible cause
Motor parts
jamming due to
dirt.
Pressure supply
too low.
Motor is
jammed due
to material
build-up.
Remedy
Check the pressure
supply filter for con-
tamination.
Check the pressure
supply filter for con-
tamination.
Lubricate the appli-
ance
as described in the
instructions.
If necessary, repeat the
steps outlined above.
Lubricate the appli-
ance
as described in the
instructions.
GB │ IE │
19 ■