Troubleshooting; Disposal - Parkside PDEXS 150 D3 Traducción Del Manual De Instrucciones Original

■ If the appliance is exhibiting excessive vibration
levels, the cause of the vibrations must be identi-
fied and repaired.
■ Use only the genuine replacement parts recom-
mended by the manufacturer, otherwise you
could put users at danger. In doubt, contact the
Service Centre.
■ Check the sanding disc
■ Clean the appliance with a soft, dry cloth only.
■ Never use sharp or scratchy cleaning agents
under any circumstances.

Troubleshooting

Fault Possible
cause
Speed too Motor parts
slow, air jamming due
escapes from to dirt.
the outlet.
Pressure sup-
ply too low.
Appli- Motor is
ance does jammed due
not move; to material
compressed build-up.
air escapes
completely
through the
outlet.
PDEXS 150 D3
regularly for damage.
Remedy
Check the
pressure sup-
ply filter for
contamination.
Check the
pressure sup-
ply filter for
contamination.
Lubricate
appliance as
described in
the instruc-
tions.
If necessary,
repeat the
steps outlined
above.
Lubricate
appliance as
described in
the instruc-
tions.

Disposal

The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of the appliance in the normal
domestic waste!
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
GB │ IE │
21 ■