Ocular Visor; Helmet Adjustment - MSA F1 SF Manual De Instrucciones

OCULAR VISOR

The ocular visor complies with the 89/686/CE directive and is certified according to EN 166:2002 with the permanent marking
Gallet 2A EN 166-A CE (2:optical class; A: Resistance to the impact of high energy at 190ms
protection against shocks and projections.
Warning!
- The vision glasses worn under a face shield can be damaged during an impact and can pose risk of injury for the wearer.
- Any shield that has been dropped or damaged must be replaced.
- The performances of the facial shield are applicable only when it is in lowered position. The shield must be in up position
under the cap when using a SCBA basic apparatus (SCBA).
- It is best to use equipment not marked "T" only at non-extreme ambient temperatures.
- Materials that come into contact with the wearer's skin could cause allergies in sensitive individuals.
RATCHET CRADLE
A
• Adjust the size of the band using the following sizes:
- S: Recommended for a head size of 53 to 56 cm
- M: Recommended for a head size of 56 to 60 cm
- L: Recommended for a head size of 60 to 64 cm
Size adjustment
1
2 Quick adjustment (a) tightening (b) loosening

HELMET ADJUSTMENT

HEAD SIZE
For maximum safety and comfort, we recommend that you
adjust your helmet vertically to a 20° to 30° angle. It is also
essential to make the following adjustments:
2
(b)
-1 ). This visor provides eye
1
(b)
(a)
(a)
GB
15