Machine Dimensions; Dimensional Clearances - Alliance Laundry Systems UW35PV Instalación/Mantenimiento

Installation

Machine Dimensions

Dimensional Clearances

Allow a minimum of 24 inches (60 cm) at
the rear and 18 inches (45 cm) at the sides for
maintenance, inspection, and adjustment.
Allow at least 18 inches (45 cm) between
machines in multiple installations. Machine
dimensions are indicated in Figure 2 and
specified in the table below.
UWPV Pocket Hardmount Machine Dimensions (See Figure 2.)
35
in mm
30-1/8 765
A
33-3/8 847
1
B
23-3/4 603
C
43-5/8 1108
D
1/2 13
2
E
55-1/2 1410
F
36 914
2
G
8 203
H
43-7/8 1114
I
1
Overhang dimensions for the optional starch dispenser are as follows: UW35, 3-7/8 inches; UW60, 1-3/4 inches; UW80 and
UW100, 1/3 inch. (The starch dispenser does not overhang the UW125.)
2
The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only)
adds 24 inches to combined machine dimensions E and G.
16
60
in mm
35-5/8 905
36-5/8 930
28-1/4 718
45 1143
1 25
64-1/2 1638
36 914
15-1/2 394
55 1397
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
The dimensions shown here are for
Note:
planning purposes only. They are approximate
and subject to normal manufacturing
tolerances. If exact dimensions are required
for construction purposes, contact the
distributor or the manufacturer. We reserve
the right to make changes at any time
without notice.
80
in mm in
41-1/8 1045 41-1/8
41-1/2 1054 41-1/2
29 737 29
51-1/2 1308 54-1/2
3 76 3
68-1/2 1740 68-1/2
43-3/4 1111 43-3/4
16-7/8 429 16-7/8
58-1/2 1486 58-1/2
100 125
mm in
1045 48
1054 48
737 29
1384 58
76 1-1/2
1740 72
1111 48
429 11-3/8
1486 63-3/8
mm
1219
1219
737
1473
38
1829
1219
289
1610
F232084