Lenco DAR-051 Manual De Usuario página 14

2 .1. Stereo allowed:
2 .2. Forced mono
2 .3. System (FM system), same as DAB system setting.
3 . PRESET:
3 .1. Preset Recall (Choose the Station):
Select a station and press [ENTER] to tune to the station stored in preset memory.
3 .2. Preset Store (Save a Station):
You may store your preferred FM stations to the preset station memories. There are
50 memory presets in your radio. Presets are remembered by your radio in the event of a
power failure.
The procedure for setting presets and using them to tune stations is the same for DAB modes:
In FM mode, select the desired Frequency. Then press [MENU] and use
[Preset store]. Now Press [ ,
the preset number under which you will store the station. Press [ENTER] to confirm.
Bluetooth Mode
You must follow several steps to connect your mobile phone:
1. Activate Bluetooth from your mobile phone (please refer to your phone's user manual)
2. Press POWER button to turn on the unit, then press the SOURCE button repeatedly until the "Bluetooth
searching..." indicator appears on the LCD display. It will be ready to pair automatically.
3. Use your mobile phone to search for the Bluetooth device named "Lenco DAR-051WD".
4. Select "Lenco DAR-051WD" on your phone and it present the option to connect or not. Please
connect to it using the password "0000" (if any). When you are successfully connected, the Bluetooth
indicator "Bluetooth connected" appears on the LCD display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone have been
paired once, they will automatically connect when the unit is on and Bluetooth is activated on the phone. The
next time you power on, the unit will automatically connect to the most recently connected mobile phone.
Play from Bluetooth Device
After successful Bluetooth connection, press the
tracks backwards or forwards. To pause or resume play, press the
to disconnect all paired Bluetooth devices.
] to view the stored stations, and then press [ENTER] to select
button to play. Press the
- EN 14 -
and
or button to skip the
button again. Press and hold the button
to select