Repair And Warranty - Megger DET10C Manual Del Usuario

REPAIR AND WARRANTY

The instrument circuit contains static sensitive devices, and care must be taken in handling the printed
circuit board. If the protection of an instrument has been impaired it should not be used, and be sent
for repair by suitably trained and qualified personnel. The protection is likely to be impaired if, for
example, the instrument shows visible damage, fails to perform the intended measurements, has been
subjected to prolonged storage under unfavourable conditions, or has been exposed to severe transport
stresses.
New Instruments are Guaranteed for 1 Year from the Date of Purchase by the User.
Note: Any unauthorized prior repair or adjustment will automatically invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for Megger Instruments contact
Megger Limited
Archcliffe Road
Dover
Kent CT17 9EN
England
Tel: +44 (0)1304 502243
Fax: +44 (0)1304 207342
Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair, it should be sent, freight pre-paid, to the
appropriate address. A copy of the Invoice and of the packing note should be sent simultaneously by
airmail to expedite clearance through Customs. A repair estimate showing freight return and other
charges will be submitted to the sender, if required, before work on the instrument commences.
17
or Megger
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown
PA 19403 U.S.A.
Tel: +1 (610) 676-8579
Fax: +1 (610) 676-8625