Kit Assembly - Metra 95-7805CH Instrucciones De Instalación

ISO Double DIN radio provision
1. Attach the (4) panel clips to the
radio housing. (Figure A)
2. Attach the brackets to the radio
housing using the supplied
(4) #8 x 3/8" Pan-head Phillips
screws. (Figure B)
3. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure C)
4. Attach the A/C vents to the
radio housing using the factory
hardware.
95-7805CH

Kit Assembly

(Figure A)
(Figure B)
5. Attach the hazard switch to the
radio housing using the supplied
(2) #8 x 1/2" Truss-head Phillips
screws.
6. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
7. Reassemble dash in reverse order
of disassembly.
6
(Figure C)