Taurus TCC3 Manual De Instrucciones página 10

English
Juicer
TCC3
Dear customer,
Many thanks for choosing to purchase
a TAURUS brand product.
Thanks to its technology, design and
operation and the fact that it exceeds
the strictest quality standards, a fully
satisfactory use and long product life
can be assured.
Description
A Tank Cover
B Filter cone
C Tank
D Motor base
E Non-drip valve
F Cord housing
Safety advice and warnings
- Read these instructions carefully
before switching on the appliance
and keep them for future reference.
Failure to follow and observe these
instructions could lead to an
accident.
- Clean all the parts of the product
that will be in contact with food, as
indicated in the cleaning section,
before use.
Use or working environment:
- Keep the working area clean and
well lit. Cluttered and dark areas
invite accidents.
- Keep children and bystanders away
when using this appliance.
- The appliance must not be placed
below a power socket.
- The appliance must be used and
placed on a flat, stable surface.
eighing area with walls or other
objects not to be weighed. Otherwise,
it will not show the right weight.
- Place the appliance a minimum
distance of 50cm away from
combustible materials, such as
curtains, furniture ...
Electrical safety:
- Do not use the appliance if the
cable or plug is damaged.
- Ensure that the indicated voltage
on the nameplate matches the
mains voltage before plugging in the
appliance.
- Connect the appliance to a socket
that can supply a minimum of 10
amps.
- The appliance's plug must fit
into the mains socket properly. Do
not alter the plug. Do not use plug
adaptors.
- Do not use or store the appliance
outdoors.
- Do not use the appliance if it has
fallen on the floor, if there are visible
signs of damage or if it has a leak.
- Do not force the power cord. Never
use the power cord to lift up, carry or
unplug the appliance.
- Keep the appliance away from heat
sources and sharp edges.
- Do not touch the plug with wet
hands.
Personal safety:
- Before using the appliance ensure
that the tool is properly fixed in
place.
- Do not touch any of the appliance's
moving parts while it is operating.