Kohler K-702100 Manual Del Usuario página 5

Leg faces outside
of shower.
Bottom
Track
A
1. Install the Bottom Track
CAUTION: Risk of product damage. Do not cut the top track at this time. The top track dimension
is not the same as the bottom track.
Measure from the inside to inside of the wall jambs (dimension "A"). Mark dimension "A" on the
bottom track.
NOTE: For best results use a miter box and 32 teeth per inch hacksaw to make the cut.
Cut the bottom track at the mark.
File the rough edges smooth where the bottom track was cut.
Apply a 1/4" (6 mm) bead of silicone sealant into the groove on the underside of the track.
Install the bottom track with the sealant side down and the front leg facing the outside of the
shower.
Temporarily secure the bottom track to the threshold with masking tape.
Kohler Co.
A
5
Bottom Track
Apply sealant
Front Leg
1036566-2-F