General Characteristics - Cembre RHM132 Manual De Uso Y Mantenimiento

1. GENERAL CHARACTERISTICS

– Application range: the head is suitable for compression of electrical connectors on conductors
– Crimping force: ................................................................................................................. 130 kN
– Max operating pressure: .............................................................................................. 700 bar
– Oil necessary (displacement): ..................................................................................... 47 cm
– Dimensions: length ........................................................................................................ 216 mm (8.5 in.)
width .......................................................................................................... 80 mm
– Weight (without dies): .................................................................................................... 3,1 kg
2. INSTRUCTIONS FOR USE
2.1) Setting
The head is equipped with a "self-lock" quick male coupler suitable for connection to a hydraulic,
pneumatic or electrical pump from the Cembre range.
For a given connector select and install the appropriate die set (see § 3).
2.2) Die advancement
– Insert the conductor into the connector.
– Locate the connector between the dies at the desired crimp position.
– Operate the pump to advance the die.
Do not build up the pressure without dies inserted in the presshead.
Make sure that dies are exactly positioned on the area to be crimped; otherwise reopen dies following
instructions as per § 2.4 and reposition the connector.
2.3) Crimping
Operate the pump to advance the ram until the die faces touch.
It is recommended to continue pumping until the maximum pressure valve is activated and a
"click" is heard.
2.4) Die opening
Fully discharge the oil pressure from the pump, to retract the ram and release the crimped connector.
3
HYDRAULIC PRESSHEAD
up to .............................................................................................. 400 mm
(Ref. to Fig. 1)
RHM132
ENGLISH
2
(800 MCM)
(14.6 sh ton)
(10,000 psi)
3
(2.9 cu. in.)
(3.15 in.)
(6.8 lbs)