General Characteristics - Cembre B-FC470 Manual De Uso Y Mantenimiento

1. GENERAL CHARACTERISTICS

Application range
Hole punching range
Max. hole centre distance
from the edge of the trunking
(ref. to fi g. 3)
Minimum operating pressure
Dimensions (ref. to Fig. 7)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
Battery charger
ASC30-36
Input
(1)
Acoustic noise
L
pA
L
pCPeak
L
WA
(2)
Vibration
(*)
The tool can also be used to punch holes up to
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
(2)
Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 Standard, and under
operating conditions much more severe than those normally found.
B-FC470 B-FC470E B-FC470T B-FC470A
mm (inches)
mm (inches)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from a rapid
advancing speed of the ram to a slower, more powerful speed
V / Ah / Wh
kg (lbs)
EU
type
27044000
V / Hz
W
dB (A)
dB (C)
dB (A)
2
m/s
ø
28,5 mm in the base of trunking that is less than 50 mm (2") deep.
suitable for punching holes in
the sidewall* of cable trunking
ø 15,5 ÷ 47,2 (ø 0.61 ÷ 1.86)
53,5 (2.11)
370 (5,300)
379 x 346 x 83 (14.9 x 13.6 x 3.3)
6,2 (13.6)
18
-15 to +50 (+5 to +122)
AGIP ARNICA 32 or equivalents
maximum pressure valve
18 / 4.0 / 72
CB1840L (Li-Ion)
0,66 (1.45)
UK AUS/NZ
27045000 27047000
220 - 240 / 50 - 60
85
73
94.5
79
0.575 max.
USA/CAN
27046000
115 / 60
6