General Characteristics - Cembre B-FL750 Manual De Uso

1. GENERAL CHARACTERISTICS

Application range
Max. punching capacity
Developed force
Minimum operating pressure
Dimensions (ref. to Fig. 5)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
Battery charger
Input
(1)
Acoustic noise
L
pA
L
pCPeak
L
WA
(2)
Vibration
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
(2)
Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 Standard, and under
operating conditions much more severe than those normally found.
B-FL750
suitable for punching single layers of Stainless Steel,
mm (inches)
kN (US sh. ton)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from a rapid
advancing speed of the ram to a slower, more powerful
V / Ah / Wh
kg (lbs)
ASC55-
type
EU
V / Hz
W
dB (A)
dB (C)
dB (A)
2
m/s
B-FL750E B-FL750T B-FL750A
Mild Steel, Fibreglass, Plastic material
ø 140 / 5.5
75 (9)
700 (10,000)
363 x 366 x 83 (14.3 x 14.4 x 3.3)
5,1 (11.2)
18
-15 to +50 (+5 to +122)
ENI ARNICA ISO 32 or equivalents
speed
maximum pressure valve
18 / 5.2 / 93.6
CB1852 (Li-Ion)
0,66 (1.45)
ASC30-36- ASC30-36-
UK AUS/NZ
220 - 240 / 50 - 60
85
73
94.5
79
0.575 max.
ASC30-36-
USA/CAN
115 / 60
6