Conformity Declaration - Rupes LHR 15ES Instrucciones Original De Uso Y Manutención

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1. Type of tool.
2. Nominal working voltage in Volts (V).
3. Working frequency in Hertz (Hz).
4. Absorbed current in Amperes (A). Ensure that the power supply to
which the tool is connected can easily tolerate the indicated
current as a minimum.
5. Absorbed power expressed in Watts (W).
6. T ool code or serial number.
7. T echnical data of the tool.
8. Maximum rpm
9. The double square indicates that the tool is doubly insulated and
therefore does not require earthing through the power supply
cable.
10.
Read all these instructions before operating this product and
save these instructions.
11.
Personal safety devices.
12.
At the end of its useful life, the product, pursuant to European
Directive 2002/96/CE (RAEE) + 2003/108/CE and its
implementation in national law, must not be released into the
environment or thrown away as domestic waste, but must be
disposed of at authorised recycling centres (contact the relevant
local authorities for a list of places where the product may be
disposed of according to the law).Disposing of the product
correctly contributes to protecting human health and
safeguarding the environment. Any illegitimate disposal of the
product will be punishable by law.

CONFORMITY DECLARATION

We declare on our responsability that the hand-held motor operated tool,
which is mentioned in the present operating manual, is in comformity with
the Essential Requirements of Safety of the following Directives:
2006/42/CE
Machinery
2006/95/CE
Low T ension
2004/108/CE
Electromagnetic Compatibility
2011/65/CE
RoHS
The tests have been carried out in accordance with following Standards:
EN 60745-1: 2010
EN60745-2-4:2009 + A11:2011
EN 55014-1: 2006 + A1: 2009 + A2: 2011
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2006 + A1: 2001 + A2: 2009
EN61000-3-3: 2008
EN 62233: 2008
Vermezzo (MI), 21/12/2012
S.p.A
IL PRESIDENTE
G. Valentini
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lhr 21es

Tabla de contenido