Maintenance And Servicing; Conformity Declaration - Rupes RX153A Instrucciones De Funcionamiento Y Mantenimiento

MAINTENANCE AND SERVICING

WARNING: All maintenance operation are carried out with the power supply disconnected, assure
that the tool is unplugged.
CLEANING
At the end of each work session, or when required, remove any dust from the body of the tool using a soft
cloth, paying particular attention to the motor ventilation slots.
No other maintenance operations must be undertaken by the user.
REPAIRS
Maintenance and cleaning of the inner parts like ball bearings, gears etc. or others, must be carried out only
by an authorized customer service workshop.
DISPOSAL (WEEE DIRECTIVE)
For EC countries only: According to the European Directive on Waste from electrical and
electronic equipment and its implementation in conformity with national standards, exhausted
electrical equipment must be collected separately, in order to be recycled in an environmentally
friendly way. The product, when it reaches the end of its life, must not be dispersed in the
environment or thrown away as household waste. It must be disposed at authorized recycling centres (contact
your local authorities to know where to dispose of the product according to the law). The correct disposal of
the product contributes to the health and preservation of the environment. Illegal disposal of the product will
entail penalties against the offenders.

CONFORMITY DECLARATION

We declare on our responsibility that the represented tool is in conformity with the directives:
2006/42/CE, 2014/35/CE, 2014/30/CE, 2011/65/CE.
The tests have been carried out in accordance with standard:
EN 60745-1: 2010;
EN 60745-2-3:2011;
EN 60745-2-4: 2009 + A11: 2011;
EN 55014-1: 2006 + A1: 2010 + A2: 2012;
EN 55014-2:2015;
EN 61000-3-2: 2015;
EN 61000-3-3 :2014;
EN 50581: 2012.
Vermezzo (MI), 2017/03/28
Via Marconi, 3A - Loc. Vermezzo
20071 - VERMEZZO CON ZELO (MI) - Italy
The President
G. Valentini
Technical fi le at:
RUPES SpA
S.p.A.
11