Conformity Declaration - Rupes LHR12E Traducción Del Manual De Instrucciones Original

ACCESSORIES DISASSEMBLY
BACKING PAD
POLISHING FOAM
pressing on the backing pad.
ALLOWED ACCESSORIES
LHR 12E: polishing foam Ø 130-150 mm for backing pad Ø 125 mm.
LHR 75E: polishing foam Ø 80-100 mm for backing pad Ø 75 mm.
NOISE EMISSION VALUES
directives:
EN 6 1
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
UNCERTAINTY
(K)
Use ear protection!
VIBRATION EMESSION VALUES
directives:
EN 6 1
3 AXIS VIBRATION LEVEL
(K)
UNCERTAINTY
work period must also include tool's idle and stop periods.
These emission values represent the tool's main applications.
If the tool is used for other applications, with other accessories,
or if it does not undergo regular maintenance, emission values
Danger! The indicate measurements refer to new power
to change.
LHR 12E
3
dB(A)
LHR 12E
m/s 2.7
2
m/s
2
0.5
MAINTENANCE
All maintenance operations are carried out with the power
No other maintenance operations must e undertaken
the user.
Maintenance and cleaning of the inner parts, like brushes, ball
authorized customer-service workshop.
DISPOSAL (WEEE DIRECTIVE) DISPOSAL (WEEE DIRECTIVE)
At the end of its useful life, the product, pursuant to
For EU countries onl : According to the European
Directive on Waste from electrical and electronic
CE and its implementation in national law, must not be released
equipment and its implementation in conformity with
collected separately, in order to be recycled in an
LHR 75E
environmentally friendly way. The product, when it reaches the
the relevant local authorities for a list of places where the
end of its life, must not be dispersed in the environment or
thrown away as household waste. It must be disposed at
3
authorized recycling centres (contact your local authorities to
and safeguarding the environment.
know where to dispose of the product according to the law).
The correct disposal of the product contributes to the health
law.
and preservation of the environment.
Illegal disposal of the product will entail penalties against the

CONFORMITY DECLARATION

offenders.
following Directives:
CONFORMITY DECLARATION
2006/42/CE, 2006/95/CE, 2004/108/CE, 2011/65/CE.
LHR 75E
We declare on our responsibility that the represented tool is in
The tests have been carried out in accordance with the
conformity with the Essential Requirements of Safety of the
2.5
European Harmonised Standar
following Directives:
0.5
EN 60745-1: 2010, EN 60745-2-4: 2009 + A11: 2011;
2006/42/EC, 2014/30/EU, 2011/65/EU.
EN 55014-1: 2006 + A1: 2009 + A2: 2011;
The tests have been carried out in accordance with the
EN 55014-2: 1997 + A1: 2001 + A2: 2008;
European Harmonised Standar
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009;
EN 62841-1: 2015 + AC:2015
EN 61000-3-3: 2008;
EN 62841-2-4: 2014 + AC:2015
EN 62233: 2008.
EN 55014-1: 2017
EN 55014-2: 2015
EN 61000-3-2: 2014
THE PRESIDENT
EN 61000-3-3: 2013
G. Valentini
EN 62233: 2008
EN IEC 63000: 2018.
THE PRESIDENT
RUPES S.p.A. a socio unico
Via Marconi, 3/A - Loc. Vermezzo
20071 VERMEZZO CON ZELO (MI) Italy
S.p.A
S.p.A
G. Valentini
Vermezzo con Zelo (MI), 01/12/2021
7