Charging The Batteries - DJI Mavic 2 Enterprise Guia De Inicio Rapido

3. Charging the Batteries

Use the provided charger to fully
charge the Intelligent Flight Battery
before first use.
Power Outlet
100 - 240V
Please use the official 24W USB charger to charge the Smart Controller. When a
standard 24W USB charger is not available, it is recommended to use an FCC/
CE certified USB charger rated 12V/2A.
Checking the Battery Levels and Powering On/Off
Low
High
Press once to check the battery level.
Press, then press and hold to turn on/off.
Install the battery to the aircraft and power it on. Once the battery temperature is
lower than 6° C, it will auto heat to maintain a temperature between 8-10° C. Refer to
the User Manual for more details.
Battery Charger
USB-C Cable
24W USB Charger
Remove the Intelligent Flight Battery
Low
Press once to check the battery level on
the LCD screen.
Press once, then press and hold to turn on/
off the remote controller.
Charging Time:
~1 hour 30 minutes
Charging Time:
~2 hours
High
5