Remote Controller - DJI Phantom 4 RTK Guia De Inicio Rapido

Remote Controller

The remote controller features DJI's long-range transmission technology OcuSync that is capable of
controlling the aircraft and the gimbal camera at a maximum transmission range of 4.3 mi (7 km)*. A mobile
device can be connected to the remote controller via the USB port to use the DJI Pilot app (for Android), GS
Pro (for iOS), or a third-party app developed using the DJI Mobile SDK*. The maximum remote controller
battery life is approximately 6 hours*.
1. Power Button
2. Return to Home (RTH)
Button
3. Control Sticks
4. Status LED
5. Battery Level LEDs
6. Power Port
7. Mobile Device Holder
8. Small Device Positioning
Tabs (for mobile phones)
9. Antennas
Folded
The figure below shows the function that each control stick movement performs, using Mode 2 as an
example. The left stick controls the aircraft's altitude and heading, while the right stick controls its forward,
backward, left and right movements. The gimbal dial controls the camera's tilt.
Left Stick
Down
Turn Left
* The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-
Magnetic Interference, and at an altitude of about 400 feet (120 meters).
Visit the DJI Developer website for more information about the DJI Mobile SDK. https://developer.dji.com/mobile-sdk
The maximum runtime is tested under laboratory environment, only for your reference.
Pictures will only be taken when the shutter button is fully pressed.
7
3
1
4
2
5
Right Stick
Up
Turn Right
8
9
10
6
11
13
Forward
Backward
Left
10. Handle Bar
11. Gimbal Dial
12. Reserved Dial
13. Video Recording Button
14. Pause Switch
15. Shutter Button*
16. Reserved Blank Button
17. C1 and C2 Buttons
(customizable)
18. USB Port (for mobile device
connection)
19. Micro USB Port
17
19 18
14
Gimbal Dial
Right
17
12
15 16
3