Astralpool WELLMA 1-S Manual De Uso E Instalación página 41

Let's select modules 1 and
2, moving them to the back
left corner, or whichever
numbers work best so that
the last module to put in
place is the front. This will
make completing the
process more comfortable.
We can now join them
FIG Nº 5
together with an 80mm
screw as indicated in
figure 5). On the sides of
the sauna that are visible,
affix the corners with the
zinc screws, which are to
later be covered with
plastic caps.
As you mount the modules
on the lower frame, they
FIG Nº 6
should be in a position that
allows you to still see the text
marked on them from within
the sauna. Once this is
accomplished, the various
modules will fit together in
correlation, according to the
numbers found on them
(until the booth is enclosed in
its four walls).
8
FIG Nº 4
Detail of the joining pieces
FIG Nº 7
between modules to avoid
heat escapes.
The modules will fit
FIG Nº 8
togehter without the need
for any screws or anchors.
Screws will only be used to
anchor the corners to the
correlating adjacent panels
which (see figure 5). The
upper frame will be the key
piece that joins the whole
booth together, giving it its
watertightness and own
strength.
Always affix the modules
FIG Nº 9
so that the number marked
is at the top. Otherwise,
the anchors will not
coincide with the interior
pieces.