SCA 45 Heater
This recently-introduced
heater has a new design
that meets the space
requirements for the
majority of personal use
saunas. It has a power
of 4.5kw and its
dimensions are almost
the same as the W-25.
FIG Nº 42
Its fastening system
consists of affixing the
stainless steel panel to
the wall, which will
protect the wood once
the heater is put in place
and will also serve as a
support for it.
FIG Nº 41
FIG Nº 43
This support has two holes at the top and two lower down where the heater is
fitted and subsequently affixed with two screws in the centre.
The heater should not be filled to the top with stones, so that it doesn't switch
off due to excessive heat.
23