Putting Into Operation - Boneco S450 Instrucciones Para El Uso

Description of the appliance/
Scope of delivery
Only operate the appliance when it is completely
assembled.
Steam pipe cover with fragrance container
Steam outlet
Top cover
Water tank
Water tank cap
Steam pipe
Anti-Mineral-Pad
Ventilation opening
Water level indicator
Control Panel
Ventilation openings

Putting into operation

Please make sure to observe all safety instruc-
tions!
Use the appliance only on flat, stable, water- and
heat-resistant surfaces. Keep a minimum dis-
tance of 1m from walls, furniture, and curtains
(risk of moisture damage) (6). Caution: Knock-
ing the unit over can cause scalding due to hot
Optional
water.
Always plug the power cord into the appliance
Water base
first, before connecting it to the electrical outlet
(7). Caution: Insert the plug fully into the unit!
Steam tray
A sound from the unit indicates that the
appliance is supplied with power.
Anti-Mineral-Pad
Please note that the appliance will produce
louder operating noises for the first few minutes
during commissioning.
Filling and refilling the tank with water
Caution: Only fill the water tank with fresh, cold
tap water. Do not use carbonated mineral water
or any other liquids.
Caution: Hot after usage!
Caution: Never pour any water into the ventila-
tion openings since this can damage the appli-
ance.
Water level sensor
Always fill water right into the tank. Never pour water
directly into the unit or into the steam pipe (8).
Power cord
en
17