Storage And Handling; Removal Instruction - AMATECH F-NTSHD Instrucciones De Uso

INSTRUCTIONS FOR USE
c. Position the buckle mount 150mm (6") from the strap mount on the table rail
toward the head end of the table. Tighten.
d. Pull the strap through the buckle until it is taut, and the patient is held on the
table. Lock by pressing the buckle latch to the closed position.
e. Repeat steps a. through d. for the other strap.
Device controls and indicators:
Controls and indicators of this device are described within the Setup instructions.
Storage, Handling and Removal Instructions:
3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2

Removal Instruction:

a. Loosen the strap from the buckle.
b. Loosen the buckle section mount knob and remove mount.
c. Release the patient thigh and remove the strap section mount.
Troubleshooting Guide:
This device does not have a troubleshooting guide. For technical support user of
the device shall first contact his or her supplier.
Document Number: D-720545
Version: C
Strap Section
Mount
Page 12
Buckle Section
Buckle
Mount
Issue Date: 24 MAR 2020
Ref Blank Template: 80025118 Ver. E