INSTRUCTIONS FOR USE
3. Secure the Hook by sliding the Lock Plate over
the top of the Accessory Rail.
4. Confirm that the Lock Plate and Hook is
securely attached to the Accessory Rail.
5. Adjust strap tension as previously described.
Device controls and indicators:
Controls and indicators of this device are described within the Setup instructions.
Storage, Handling and Removal Instructions:
3.4.1
Storage and Handling:
The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2
Removal Instruction:
Remove Strap
Lift up on the Cam Buckle and pull the Strap out from the Buckle. Remove the
Strap from the Accessory Rail.
Remove Hooks
To remove the Hooks from the Accessory Rail, reverse the previous steps.
Troubleshooting Guide:
This device does not have a troubleshooting guide. For technical support users of the
device shall first contact their supplier.
Device Maintenance:
Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Contact Allen Medical Systems, Inc. if you need to repair or replace the device
contact us using the information from the contact details section (1.3).
Document Number: 80028309
Version: B
Page 13
Issue Date: 31 MAR 2020
Ref Blank Template: 80025118 Ver. E