Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction - AMATECH F-MDTABSL Instrucciones De Uso

INSTRUCTIONS FOR USE
To adjust the Armboards radial angulation
c.
SIMPLY LIFT UP ON THE END OF THE BOARD
and move it in the desired direction. Lower
the end of the Armboard and the weight of
the arm will lock the board in position. Do
not apply excessive force when lifting the
end of the Armboard. Only 0.9-1.4kg
(2-3lbs) of such force should be required to
disengage the lock mechanism during
repositioning. Extreme upward forces could
damage the Armboard.
Be careful not to install the armboard at a table section articulation level. the
armboard could be damaged in case of movement.

Device controls and indicators:

Controls and indicators of this device are described within the Setup instructions.

Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage.
3.4.2

Removal Instruction:

a. Grasp the end of the Armboard with one hand. With the other hand lift
the latch handle.
b. Lift the end of the board up and pull the Armboard away from the rail.

Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support users of
the device shall first contact their supplier

Device Maintenance:

Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Contact Allen Medical Systems, Inc. if you need to repair or replace the device
contact us using the information from the contact details section (1.3).
Document Number: D-724017
Version: C
Page 13
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E