Technical Data; Noise Information; Vibration Information - Worx WX445 Traducción De Las Instrucciones Originales

1. LOCK-OFF BUTTON
2. ON/OFF SWITCH
3. LASER ON/OFF SWITCH
4. FRONT HANDLE
5. BASE PLATE ANGLE SCALE
6. BASE PLATE BEVEL LOCK
7. PARALLEL GUIDE
8. BASE PLATE
9. PARALLEL GUIDE LOCK KNOB
10. SPINDLE LOCK BUTTON
11. LASER GUIDE
12. OUTER FLANGE
13. LOWER GUARD
14. SAW BLADE*
15. BLADE BOLT
16. LOWER GUARD LEVER
6
17. VACUUM ADAPTER
18. REAR HANDLE
19. DEPTH OF CUT SCALE
20. HEX KEY
21. DEPTH OF CUT ADJUSTMENT LEVER
22. INNER FLANGE (See Fig. G)
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WX445 WX445.1( 4- designation of
machinery, representative of Saw )
Rated voltage
Rated power
Rated no load speed
Circular saw with laser
WX445 WX445.1
220-240V ~50/60Hz
1600W
5000/min
90°
Max. cutting
capacity
45°
Bevel capacity
Blade size
Protection class
Weight

NOISE INFORMATION

A weighted sound pressure L
K
pA
A weighted sound power L
K
wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Cutting wood: a
Vibration emission
value
Uncertainty K=1.5m/s
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the
ways in which the tool is used dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
66mm 64mm
47mm 45mm
0-51°
190mm 185mm
/II
4.3kg
L : 82dB(A)
pA pA
3dB(A)
L : 93dB(A)
wA wA
3dB(A)
= 4.36m/s
2
h,W
2
EN