Tabla de contenido
Publicidad
When the power cord is damaged, it should be replaced with the power cord of the same parameters.
It should be performed by a qualified professional or the tool should be delivered to an authorised
service shop.
When the commutator sparks excessively, have the condition of motor carbon brushes checked by a
qualified person.
The tool should be always stored in a dry place and out of reach of children.
REPLACING THE CARBON BRUSHES
Worn (shorter than 5 mm), burnt or cracked motor carbon brushes should be immediately replaced.
Both carbon brushes should be always replaced at the same time.
Carbon brushes should be replaced by a qualified person using original spare parts only.
All types of faults and defects should be eliminated by an authorised service of the manufacturer.
RATED DATA
Power supply voltage
Power supply frequency
Rated power
Idle speed range:
Max. grinding wheel diameter
Spindle collet diameter
Protection class
Weight
Year of manufacture
NOISE AND VIBRATION DATA
Acoustic pressure level: Lp
Acoustic power level: Lw
A
Vibration acceleration value a
Do not dispose of electrically powered products with household wastes, they should be utilized in
proper plants. Obtain information on wastes utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.
SPECIFICATIONS
Straight grinder
Parameter
= 85,63 dB(A) K = 3 dB(A)
A
= 96,63 dB(A) K = 3 dB(A)
= 3,278 m/s² K = 1,5m/s²
h
ENVIRONMENT PROTECTION
12000 ÷ 28000 min
19
Value
230 V AC
50 Hz
710W
-1
25 mm
6 mm
II
2 kg
2016
Publicidad
Tabla de contenido
