Pegasolift PL13 Guía De Uso Y Mantenimiento página 107

MANUTENÇÃO E INSPEÇÃO DE PLANEJAMENTO LISTA DE VERIFICAÇÃO
HYDRAULIC OPERATION
Test the hydraulic system.
Check hydraulic oil level and top up if necessary.
Replace the hydraulic oil after 2000 service hours .
PERFORMANCE LEVELS
Carry out a test run with rated load.
General lubricate
Lubricate the truck
STEERING
Check the steering head bearings, steering play.
Check that the tiller return in right position.
If the pallet stacker works in grave condition the maintenance interval marked with the
"*" symbol must to be made at the least one time at month.
The warranty time for the traction motor wheel is one year.
ATTENTION: All the check with an maintenance interval between 1000 and 2000
working hours must to be made at the least one time at year.
Thorough and expert servicing is one of the most important requirements for
the safe operation of the industrial truck.
Failure to perform regular servicing can lead to truck failure and poses a
potential hazard to personnel and equipment.
The application conditions of an industrial truck have a considerable impact on
the wear of the service components.
We recommend that a PEGASO customer service adviser carries out an
application analysis on site to work out specific service intervals to prevent
damage due to wear.
The service intervals stated are based on single shift operation, of 8 working
hours, under normal operating conditions. They must be reduced accordingly if
the truck is to be used in conditions of extreme dust, temperature fluctuations or
multiple shifts.
During the run-in period – after approx. 100 service hours – the owner must
check the wheel nuts / bolts and re-tighten if necessary.
*
*
*
107
A 107
Maintenance interval
350 hours
1000 hours
2000 hours
Maintenance interval
100 hours
100 hours
100 hours
Maintenance interval
100 hours