Pegasolift PL13 Guía De Uso Y Mantenimiento página 179

MAINTENANCE AND INSPECTION PLANNING CHECKLIST
HYDRAULIC OPERATION
Test the hydraulic system.
Check hydraulic oil level and top up if necessary.
Replace the hydraulic oil after 2000 service hours .
PERFORMANCE LEVELS
Carry out a test run with rated load.
General lubricate
Lubricate the truck
STEERING
Check the steering head bearings, steering play.
Check that the tiller return in right position.
If the pallet stacker works in grave condition the maintenance interval marked with the
"*" symbol must to be made at the least one time at month.
The warranty time for the traction motor wheel is one year.
ATTENTION: All the check with an maintenance interval between 1000 and 2000
working hours must to be made at the least one time at year.
Thorough and expert servicing is one of the most important requirements for the safe
operation of the industrial truck.
Failure to perform regular servicing can lead to truck failure and poses a potential hazard
to personnel and equipment.
The application conditions of an industrial truck have a considerable impact on the wear
of the service components.
We recommend that a PEGASO customer service adviser carries out an application
analysis on site to work out specific service intervals to prevent damage due to wear.
The service intervals stated are based on single shift operation, of 8 working hours,
under normal operating conditions. They must be reduced accordingly if the truck is to be
used in conditions of extreme dust, temperature fluctuations or multiple shifts.
During the run-in period – after approx. 100 service hours – the owner must check the
wheel nuts / bolts and re-tighten if necessary.
*
*
*
71
B 71
Maintenance interval
350 hours
1000 hours
2000 hours
Maintenance interval
100 hours
100 hours
100 hours
Maintenance interval
100 hours