VEHICLE CONFIGURATION
VEHICLE CONFIGURATION MENU
In this menu it is possible to change the setting of the LEONARDO E.C.U. in order to adapt it to the
different characteristics of each vehicle and to the different operational conditions.
Below is a table that indicates all the possible settings, as well as their logical order in the "VEHICLE
CONFIGURATION MENU. The settings in the boxes outlined with broken line are displayed only if the
corresponding options are activated.
PRIMER DURATION
VALUE FOR EMPTY TANK
⇓
LOW FUEL
⇓
ONE QUARTER LEVEL
⇓
TWO QUARTER LEVEL
⇓
THREE QUARTER LEVEL
⇓
FULL TANK LEVEL
42 - 188
IGNITION TYPE OR
NUMBER OF CYLINDERS
⇓
TYPE OF RPM SIGNAL
⇓
⇐
TYPE OF PETROL TO
ALT. FUEL SWITCH-OVER
⇓
⇐
TYPE OF ALT. FUEL
LEVEL INDICATOR
⇓
TPS TYPE
⇓
O2 SENSOR TYPE
⇓
O2 SENSOR READING
DELAY
⇓
TYPE OF O2 SENSOR
SIMULATION
⇓
YELLOW WIRES
UTILIZATION
⇓
ERASE MEMORY
LEONARDO
⇒
PETROL TO ALT. FUEL
SWITCH-OVER RPM
⇓
DURATION OF FUEL
OVERLAP
⇒
HIGH WAVE DURATION
⇓
LOW WAVE DURATION
⇓
O2 SENSOR OPEN
CIRCUIT DURATION
⇓
N° OF SIMULATED WAVES
Is215-2 Rev. 110105-2